Steam-Water Separator GS3
Overview
Merits
Gas-water separators separate steam and drip in the steam on the basis of inner geometrical figure and principle of different flowing of steam and water,so as to increase steam dryness to assure operation.
1.Improvement of steam dryness,assurance of using temperature of steam using equipment,and improvement of heat efficiency of the equipment.
2.Separation of condensate in front of steam using equipment to prevent water hammer.
3.Adoptable for separation of separation of various kinds of gases and liquids.
|
Product model |
||||
|
Valve body materials |
PMA（Mpa） |
Maximum Allowable temperature |
Used medium |
|
|
GS3 GS1、GS7 GS13 |
1.6 1.6 2.5 |
220 420 420 |
Steam、Gas、Condensate water Steam、Gas、Condensate water Steam、Gas、Condensate water |
|
Part and component name
Material
Valve body、Valve cover
Cast-iron、Carbon steel
Filtration cover
Stainless steel
|
Product model |
Calibre |
Flange |
Thread/ welding |
H1 |
H2 |
Vent |
Pressure change range |
(MPa) Nominal pressure |
|
GS3 |
40-65 |
455 |
- |
90 |
150 |
0.1-2.5 |
2.5 |
|
|
GS3 |
80-100 |
483 |
- |
110 |
180 |
0.1-2.5 |
2.5 |
Note
1.To offer joining size and flange standard.
2.To assure proper installation and clean out impurities inside.
Key specifications
| Valve body, Valve cover | Cast-iron, Carbon steel |
|---|---|
| Filtration cover | Stainless steel |
