Bimetallic Trap With Adjustable Temperature TB11
Overview
Bimetallic Trap
The thermo-sensitive element of bimetallic trap is a bimetallic element cast through a special process by two metals of different expansion ratio.When the bimetallic element expands after heated,different expansion ratio results in bending.The thermo-sensitive element produced on the basis of this quality can act as a switch.Bimetallic Traps are divided into adjustable offline (BK,CS17H and CS47) and online (adjustable bimetallic element TB).
Merits
1.Discharge temperature adjustable online by free installation posture.
2.High-temperature condensate water used to form water seal so as to effectively reduce steam leakage.
3.Flexible and noiseless,water hammer resistant,and good emptying performance.
4.Simple structure,easy to maintain and repair.
5.Adoptable for steam main pipes,gas distribution cylinders,steam tracing pipes,radiators,low-temperature heating trough,double layered pots and so on.
6.Adoptable for high-temperature steam pipes,gas distribution cylinders and so on.
Performance
Capable of adjusting the discharge temperature of condensate water so as to make effective use of its sensible heat.
Existing condensate water in front of the valve to form water seal to prevent steam leakage.
Capable of installation in any direction and water discharge temperature adjustable at any time.
Long durability thanks to washing and corrosion resistant alloy sphere valve core and stainless valve seat.
|
Shell pressure grade |
Load leakage |
Used medium |
Permitted backpressure rate |
Energy saving effect |
Use superheated steam |
|
1.6、 2.5、 4.0、 6.4、 10MPA |
0% |
Steam、 Condensate water |
≥75% |
Excellence |
Adaption |
|
Maximum operating pressure differential |
Freezing resistance |
Maximum allowable temperature
|
Air exhaust system |
Resis |
|
|
10.0MPA |
Excellence |
420℃ |
Automatic |
Adaption |
|
|
Part and component name |
Material |
|
Valve body、Valve cover |
Forged steel、Stainless steel |
|
Bimetal |
Stainless steel |
|
Valve seat、Valve clack |
STL alloy、High chrome stainless steel |
|
Filtrating screen |
Stainless steel |
/Prime out-form dimensions and weigh
|
Product model |
Calibre |
Flange |
Thread/ welding |
H1 |
H2 |
W |
weight |
Pressure Change range |
(MPa) Nominal pressure |
|
TB11 TB11W |
15~20 25 |
- |
90 95 |
112 |
23 26 |
62 |
1.5 |
0.1-1.6 |
2.5 |
|
TB11F |
15~20 25 32~50 |
150 160 230 |
- |
112 112 160 |
23 26 75 |
62 62 120 |
3.2 3.5 13 |
0.1-1.6 |
2.5 |
|
TB11F |
15~50 32~50 |
230 200 |
- |
|
|
|
|
|
CL300 - |
|
TB11F |
32~40 |
170 |
- |
|
|
|
|
|
Note
1.Please provide operating pressure and operating pressure difference,generating quantity of condensate water,operating temperature,connecting mode and standards in selecting product models.
2.The load of condensate Water's safety coefficient reaches 2 to 3 times in general.
3.Please make sure the drain valve is installed properly,maintained regularly,cleaned up and operates under the normal condition,so as to extend its service life.
4.TB3 and TB5 same,TB6 and TB11 same.
Key specifications
| Valve body, Valve cover | Forged steel, Stainless steel |
|---|---|
| Bimetal | Stainless steel |
| Valve seat, Valve clack | STL alloy, High chrome stainless steel |
| Filtrating screen | Stainless steel |
